Product Information
- Fits Models: 2WD S10, S15, and Sonoma Pickups
- Fits Years: 82-05
- Fits Transmissions: TH400 Short Tail, 2004R
- This crossmember is for RWD applications only.
- The RCS-10-400 is a direct bolt-in and provides ample room for your exhaust.
- We recommend a polyurethane transmission mount. The GMTM is sold separately.
- This G Force crossmember is designed to bolt through the side of the passenger frame rail and will not work for the "top frame" configuration, as commonly utilized on S10 Blazer models. See diagram for details.
- Fits Models: 2WD S10, S15, and Sonoma Pickups
- Fits Years: 82-05
- Fits Transmissions: TH400 Short Tail, 2004R
- This crossmember is for RWD applications only.
- The RCS-10-400 is a direct bolt-in and provides ample room for your exhaust.
- We recommend a polyurethane transmission mount. The GMTM is sold separately.
- This G Force crossmember is designed to bolt through the side of the passenger frame rail and will not work for the "top frame" configuration, as commonly utilized on S10 Blazer models. See diagram for details.
G Force and our Partner Brands engineer bold solutions that make installation easier without sacrificing quality. Get more support from G Force.
Our engineers are also car enthusiasts—which makes designing automotive parts second nature. Because we use our products, we know the importance of crafting them with strength and durability. Get more performance from G Force.
Specifications
Weight: 33 lbsShipping Dimensions: 39 × 15 × 7 In
Finish: Black Powder Coated
Mounting Hardware: Included
See the G Force Crossmember Overview for more info.
When you convert your S10 to accommodate a V8, there are always unforeseen issues that have to be addressed. With a G Force RCS-10-400, bolting your transmission to a crossmember and channeling the exhaust off the headers is no longer an issue—just bolt it in and go.
See installation diagram for details.See the G Force Crossmember Overview for more info.
This crossmember is installed with the G Force label facing the rear of the vehicle. However, another determining feature is the crossmember center tube which has a 1/2″ drain slot that is positioned on the bottom and on the passenger side next to the hump weldment.
This crossmember is installed so that the exhaust clearance humps are closed on the top and open on the bottom.
To use the provided 7/16″ hardware it is necessary to enlarge holes in your frame rails with a 1/2″ drill. If you choose to use the stock size 3/8″ hardware, it is strongly recommended to use new Grade #8 fasteners to compensate.
Discover more about the G Force Crossmember product line on these pages-