Fits the following transmissions: 700R4, 4L60, & early 4L60E. Finished in a black powder coat. Includes new mounting hardware. Purchase transmission mount separately. p/n GMTM.
1975-1981 (Note: distance between crossmember frame holes is approximately 31-3/4″. Measure your frame or crossmember to insure proper selection)
p/n RCF2L-700 Installation Notes:
- This crossmember is installed with the G Force label facing the rear of the vehicle. A second determining feature is crossmember center tube has a 1/2″ drain slot located on the bottom and on the passenger side next to the hump weldment.
- The crossmember is installed so that the exhaust clearance humps are closed on the top and open on the bottom.
- To utilize the provided 7/16 hardware it is necessary to enlarge the holes in the frame rails. If the installer chooses to utilize the stock size 3/8 hardware, it is strongly recommended that the installer obtains Grade 8 fasteners and washers to compensate.