1968-1981 C3 Corvette Crossmember RCC3-T56 | G Force — G Force Performance Products
Skip to content

Product Information

Description

  • Fits Models: C3 Corvette
  • Fits Years: 68-80
  • Fits Transmissions: OEM T56
  • We recommend a polyurethane transmission mount. The GMTM is sold separately.
  • This crossmember is intended for aftermarket exhaust, if using the factory exhaust there may be clearance issues.

  • Fits Models: C3 Corvette
  • Fits Years: 68-80
  • Fits Transmissions: OEM T56
  • We recommend a polyurethane transmission mount. The GMTM is sold separately.
  • This crossmember is intended for aftermarket exhaust, if using the factory exhaust there may be clearance issues.


G Force and our Partner Brands engineer bold solutions that make installation easier without sacrificing quality. Get more support from G Force.

DOWNLOAD INSTRUCTIONS

Our engineers are also car enthusiasts—which makes designing automotive parts second nature. Because we use our products, we know the importance of crafting them with strength and durability. Get more performance from G Force.

LEARN MORE

Specifications

Weight: 33 lbs

Shipping Dimensions: 52 × 11 × 6 In

Finish: Black Powder Coated

Mounting Hardware: Bottom-Up Bolts included. The installer must reuse the long horizontal bolts.

See the G Force Crossmember Overview for more info.

This crossmember is installed with the G Force label facing the rear of the vehicle. However, another determining feature is the crossmember center tube has a bracket welded to the back to accept the factory brake cable pulley.

This crossmember is installed so that the exhaust clearance humps are closed on the top and open on the bottom.See the G Force Crossmember Overview for more info.

This crossmember is installed with the G Force label facing the rear of the vehicle. However, another determining feature is the crossmember center tube which has a 1/2″ drain slot that is positioned on the bottom and on the passenger side next to the hump weldment.

This crossmember is installed so that the exhaust clearance humps are closed on the top and open on the bottom.

To use the provided 7/16″ hardware it is necessary to enlarge holes in your frame rails with a 1/2″ drill. If you choose to use the stock size 3/8″ hardware, it is strongly recommended to use new Grade #8 fasteners to compensate.

Discover more about the G Force Crossmember product line on these pages-

Customer Project Photos