Fits the following GM transmissions :   700R4 , 4L60 , 4L60E ,  Tremec TKO-500, TKO-600, and GM T-5.    Finished in a durable black-satin powdercoat paint.    Includes new high-strength, Grade#8 mounting hardware.   Purchase transmission mount separately.    A Polyurethane transmission mount recommended, like our GForce part # GMTM.

( Note :  The distance between the crossmember frame mounting holes is approximately  30-3/8″ inches.   Be sure to measure your  frame First ,  to insure proper selection.)

# RCF1-700  installation notes :

• This crossmember is installed with the GForce label facing the  REAR  of  the vehicle.    A second determining feature is the crossmember center tube section has a  1/2″ in.  drain hole located on the BOTTOM  and should be on the PASSENGER  side next to the exhaust hump weldment.
• The crossmember is installed so that the exhaust humps are towards the floor of car and open to bottom.   The Exhaust runs under the crossmember.
• To utilize the new provided  7/16″ in. mounting hardware,  it is necessary to enlarge the OEM holes in the frame.  If  installer chooses to utilize the stock size  3/8″ in.  hardware,  it is STRONGLY recommended that  installer  obtains  Grade#8  high-strength fasteners & washers to compensate.