** NEW  DESIGN **

This crossmember will fit the following GM transmissions :  TH350, Muncie, Powerglide, T-10, super T-10, Saginaw, TH200, and  TH250.  Finished in a black powder coat and includes new Grade #8 mounting hardware. Purchase transmission mount separately.   Use GForce Part No.#GMTM.

Note :  distance between crossmember frame holes is approximately  30-3/8″ in.  Measure your frame or crossmember to insure proper selection.

#RCF1-350 installation notes :

• This crossmember is installed with the G Force label facing the rear of the vehicle. A second determining feature is crossmember center tube has a 1/2″ drain slot located on the bottom and on the passenger side next to the hump weldment.
• The crossmember is installed so that the exhaust clearance humps are closed on the top and open on the bottom.
• To utilize the provided 7/16 hardware it is necessary to enlarge the holes in the frame rails. If the installer chooses to utilize the stock size 3/8 hardware, it is strongly recommended that the installer obtains Grade 8 fasteners and washers to compensate.