Newly designed and manufactured by GForce Performance- The same quality of our original crossmember, designed and manufactured to be lighter for performance.
Learn more about the strength and durability of our Next Gen Crossmembers.
1964 – 1967 : Transmission types are TH350, Muncie, Powerglide, T-10, Super-T-10, Saginaw, TH200, TH250,
700R4, 4L60, 4L60E, GM T-5, TREMEC TKO-500, and TKO-600.
1968 – 1972 : Transmission types are TH350, Muncie, Powerglide, T-10, Super-T-10, Saginaw, TH200, TH250,
700R4, 4L60, 4L60E, GM T-5, TREMEC TKO-500, TKO-600, 200R4 , and TH400(Short Tail-shaft).
1968-1972 , Hard-Tops Only * * No Convertibles & No El Caminos * *
Fits the following transmissions (depending on the model year-see addition notes below) TH350, Muncie, Powerglide, T-10, 700R4, 4L60, 4L60E, TH400, 2004R, Super T-10, Saginaw, TH200, TH250, GM-T5, TREMEC TKO 5 speeds. Crossmember is Black-Satin Powdercoated for a durable finish, and includes new Grade#8 mounting hardware. Note: Transmission Mount is purchased separately, and we recommend a Polyurethane Transmission Mount, such as our GForce part # GMTM.
( Note: Distance between crossmember frame mounting holes is 53-5/8″ inches. Be sure to measure your frame FIRST ! Before you order, to insure proper selection.)
Part #RCAE installation notes :
- Crossmember is installed with transmission mounting tab positioned towards front of car, and exhaust double humps are on the top, next to floor pan.
- The supplied aluminum spacers are to provide custom height positioning of your transmission mount. (if you need them) They are positioned between the crossmember and your GM 3 hole transmission mount. Select desired amount of spacers needed and use longer bolts to insure full engagement into transmission mount. Some applications will not require any spacers.
- Some vehicles of this generation are equipped with a crossmember that bolts directly to the vehicles frame rail, while others are equipped with crossmembers that utilize tabs that set on the frame rails, embedded with a rubber liner. Our #RCAE crossmember bolts directly to the frame rails to the factory frame holes. ( Do Not Use The Rubber Pads ! ) utilize the provided 7/16″ hardware and enlarge holes in your frame rails with a 1/2″ drill-bit. If you stay with the stock size 3/8″ hardware, it is strongly recommended to use new Grade #8 fasteners to compensate.