LS

This adapter kit will allow you to mate a Nissan 300zx (Z32) 5-speed transmission to a LS Short Crank engine (i.e.; 4.8, 5.3, 5.7, 6.0, and 6.2 li...

Note: This flywheel will not work with any other manufacturer's adapter plate. The G Force Z32 adapter and flywheel are packaged together in our ...

G Force Z32 Adapter only. No Flywheel is included. Also sold in our popular GF-LSZ32 - 5 Speed Transmission Adapter Kit, available separately. Thi...

Pilot Bushing Adapter replacement for Z32 adapter & flywheel. Also included in our popular GF-LSZ32 - 5 Speed Transmission Adapter Kit, sold s...

This Z33 350z LS swap adapter kit will allow you to mate a Nissan 350Z (Z33) 6 speed transmission to an LS Series (i.e.; 4.8, 5.3, 5.7, 6.0, and 6...

This spacer plate is used only on 1999-2000 LQ4 engines with the longer crankshaft. These engines are often identified as having iron heads instea...

The Frontier/Xterra LS swap adapter kit allows you to mate a Nissan Frontier or Xterra 6 speed manual transmission to an LS Series (i.e.; 4.8, 5.3...

Fits Models: Porsche 944, 944 S, 944 Turbo, and 951 Fits Years: 82-91 This extensive Porsche 944 LS swap kit includes the majority of the compone...

Fits Models: Porsche 944, 944 S, 944 Turbo, and 951 Fits Years: 82-91 Fits Engines: Gen 3 and 4 LS Engines Premium 321 Stainless Steel Long Tube ...

Fits Models: Porsche 944, 944 S, 944 Turbo, and 951 Fits Years: 82-91 This extensive Porsche 944 LS swap kit includes the majority of the compone...

These brackets make mounting your 1999-2005 Gen III LS Powertrain Control Module (PCM) simple Made from Stainless Steel No hardware included The P...

Our patent-pending LS engine skeleton replicates the popular LS engine mount dimensions. One tool accomplishes accurate placement of a GM gen III/...

Engines: LS and SBC The engine lift plates are ideal for installation and removal of GM LS engines. The proximity of the cylinder heads to the bel...

Models: GM Engines: LS, Vortec This adapter set allows the installation of LS Engines and Vortec Engines into early GM vehicles that use a standar...

This kit combines the G Force Adjustable LS Conversion Mounts with the versatile G Force Engine Lift Plates to make your swap even easier. The G F...

Vehicle Application: GM, Chevrolet Vehicle Years: 1997-2017 SBC Gen III & IV LS based engines Ring Gear: 168 Tooth Fits GM LS1 Engines Rear Ma...

Now with convenient tiedown loops! Fits: LS engines This two-piece stand is designed to securely store or transport LS engines and is rated for a...

Fits Models: Mustang S197 Fits Years: 2005-2014 Our S197 Mustang LS Swap Motor mounts are made from 1/4" high strength structural Steel with a dur...

Uniquely designed as a high performance replacement for all LS Engine Flexplates and Flywheels. These high strength bolts are plated with a high l...

Z32 & Z33 flywheel to pressure plate installation dowels. G Force strongly recommends replacing the dowel pins for all Z32 and Z33 installatio...

These Pressure Plate/Clutch Cover bolts are an essential component to complete your LS-Nissan conversion. High Performance Replacement for Stock 3...

This tool is a must have for your LS engine build. Simply bolt it to the back of the crank and position the tool to align a bellhousing bolt withi...

This spacer plate is used only on 1999-2000 LQ4 engines with the longer crankshaft. These engines are often identified as having iron heads instea...

Fits Models: Porsche 944, 944 S, 944 Turbo Fits Years: 1982-1991 Replaces stock "cereal bowl" with this billet aluminum adapter Allows you to bolt...