Products

This adapter kit will allow you to mate a Nissan 300zx (Z32) 5-speed transmission to a LS series engine (i.e.; 4.8, 5.3, 5.7, 6.0, and 6.2 liter g...

This 350z LS swap adapter kit will allow you to mate a Nissan 350Z (Z33) 6 speed transmission to an LS Series (i.e.; 4.8, 5.3, 5.7, 6.0, and 6.2 l...

This heavy duty Torque Converter is what you need to gain the performance you desire from your Cummins swap and your GM 4L80E transmission. This l...

Fits Years: 89-02 Fits Models: Duramax, Ram Fits Transmissions: TH400, 700R4, 4L80E This 5.9 Cummins to Chevy Adapter Plate and Flexplate Kit acco...

Models: Mustang Fits Years: 96-04 Engines: SBC Bolt a Small Block Chevy into your Mustang! This adapter was designed for hot rodders that are part...

These Pressure Plate/Clutch Cover bolts are an essential component to complete your LS-Nissan conversion. High Performance Replacement for Stock 3...

Fits Models: Chevy 4WD Fits Years: 73-87 This 2" drop crossmember allows proper engine placement and often eliminates the need for a lift kit when...

Z32 & Z33 flywheel to pressure plate installation dowels. G Force strongly recommends replacing the dowel pins for all Z32 and Z33 installatio...

G Force Z32 Adapter only. No Flywheel is included. Also sold in our popular GF-LSZ32 - 5 Speed Transmission Adapter Kit, available separately. Thi...

Pilot Bushing Adapter replacement for Z32 adapter & flywheel. Also included in our popular GF-LSZ32 - 5 Speed Transmission Adapter Kit, sold s...

Note: This flywheel will not work with any other manufacturer's adapter plate. The G Force Z32 adapter and flywheel are packaged together in our ...

G Force high strength bolts for your Cummins exhaust manifold are grade 12.9, 12-point flange head bolts. 17% stronger than OEM fasteners. Our spe...

G Force high strength bolts for your Cummins Turbo Mount are Grade 12.9, 12-point flange head bolts. 17% stronger than OEM fasteners. Our special ...

Fits Years: 89-02 Engine: Dodge Cummins 12 & 24 Valve The factory dowel pin used in the Cummins timing gear assembly is prone to backing out. ...

These high strength torque converter bolts are what you need to bolt to your Cummins Conversion Flexplate. 10mm x 1.5 16mm Underhead Length Thread...

These steel, zinc plated bolts are constructed to strict engineering quality standards and serve as direct replacement bolts for replacing the sta...

Flexplate bolts for mounting your Cummins to a GM Bellhousing. 12mm x 1.25 25mm underhead length Set of 8 bolts

Purchase these premium grade bellhousing adapter bolt kits to make mounting the bellhousing to your transmission as simple as possible. Set of 9 b...

Models: Mustang Fits Years: 84-95 Engines: SBC For hot rodders that are partial to their Chevy engines, but like the popular Mustang chassis. We'v...

Models: Mustang Fits Years: 84-95 Engines: SBC Bolt a Small Block Chevy into your Mustang! This adapter was designed for hot rodders that are part...

Models: GM Fits Years: 63-82 Engines: SBC, BBC This is the early style "short and wide" motor mount that measures 2 5/8" between the ears and is 1...

Engines: LS and SBC The engine lift plates are ideal for installation and removal of GM LS engines. The proximity of the cylinder heads to the bel...

This spacer plate is used only on 1999-2000 LQ4 engines with the longer crankshaft. These engines are often identified as having iron heads instea...

This spacer plate is used only on 1999-2000 LQ4 engines with the longer crankshaft. These engines are often identified as having iron heads instea...