Honda K24Z3 Motor Mount and Swap Block Kit
Simplify Your Honda K24Z3 Swap
Hey Guys
Jordan from G Force
Are you looking to do a Honda K swap? In front of me I have some products that might help. We have our DIY mount kit, which is comprised of all the components you need to fabricate your own mounts. We have our, mount plates. They're laser cut out of quarter inch steel. These will bolt to your, K24Z3 engine.
And, then we have all of our necessary tabs and tubes, polyurethane bushings and hardware, that you will need to fabricate your own mounts. Now, if you want to make this even easier, we have our K24Z3 Mock Up Block. So, this is great because it accurately represents all of the mounting positions of this engine, but it's lightweight.
You can lift it in and out of your engine bay. You don't even have to have a cherry picker or worry about smashing your engine bay with a heavy engine. This Mock Up Block, another thing to note is that it's made out of steel, so you can bolt your DIY mount kit right to it and then weld on it as well and not worry about it melting, like foam mock up blocks might.
So, if you want to find out more about our, Mock Up Block and our DIY Mount Kit, check us out at Crossmembers.com.
Thanks for watching.
You can find all our Honda parts here.
Visit our YouTube Channel for more tips and information.
Don't forget to subscribe to get all the latest Tech Tip Videos from G Force.