Skip to content
G Force Swap Block Mock-Up Blocks

G Force LS Engine and 6L80-6L90 Transmission Swap Blocks

Drop Crossmember and Motor Mounts Engineered for a Cummins Swap

Hey Guys, Jordan from G Force.

Are you looking for an easy way to mock up your engine and transmission into your classic car?

Look no further than the G Force Swap Block™. In front of me, I have one of our popular combinations, which is an LS mock-up Block, and 6L80 and 6L90 mock-up transmission. So what's nice about these is that they provide accurate placement of your transmission mount and your motor mounts.

You can also put this in and out of your engine bay by hand. You can make sure that your transmission fits in your tunnel, or whether you have to do any modifications before lifting a heavy transmission up into your drivetrain. So if you want to find out more about our Swap Blocks and other products, check us out at Crossmembers.com.

Thanks for watching.

You can find all our Swap Block Mock Up Blocks here.

Visit our YouTube Channel for more tips and information.

Don't forget to subscribe to get all the latest Tech Tip Videos from G Force.

 

Questions about our Swap Block Mock Up Blocks?
Send us a note or give us a call at 330-753-5300

Filed in: bbc swap block, cummins 4bt swap block, Cummins 6BT swap block, engine swap block, G Force, G Force Performance Products, G Force Swap Block Engine Mock Up Block, G Force Swap Block Transmission Mock Up, GForce, godzilla swap block, hemi swap block, Jordan Sampson, ls mock up swap block, LS Swap, ls swap block, lt swap block, sbc swap block, soloswap, swap, swap block, Swap Blocks, swap kits, Transmission Swap, transmission swap block
Previous article Bundle and Save
Next article Cummins Drop Crossmember and Motor Mounts