Manual Transmission Swap Specifications and Technical Info
Manual transmission swap specifications are listed below. The specs are shown by transmision name. This information is for reference only and cannot be guaranteed accurate.
If you need help finding the right crossmember for your swap project, visit Find the right Crossmember to support your transmission for additional information. Automatic transmission specs are also available.
Manual Transmission Swap Specifications and Technical Information.
All specifications are for reference only and cannot be guaranteed accurate.
| Transmission | Rear of Bellhousing to end of Tail | Rear of Bellhousing to Mount | Splines Input/Output | First | Second | Third | Fourth | Fifth | Sixth |
|---|---|---|---|---|---|---|---|---|---|
| Muncie - pre 71 (wide ratio) | 21.50 | 14.00 | 10/27 | 2.58 | 1.91 | 1.48 | 1.00 | ||
| Muncie - pre 70 M22 (wide ratio) | 21.50 | 14.00 | 10/27 | 2.58 | 1.91 | 1.48 | 1.00 | ||
| Muncie - pre 71 (close ratio) | 21.50 | 14.00 | 10/27 | 2.20 | 1.84 | 1.28 | 1.00 | ||
| Muncie - pre 70 M22 (close ratio) | 21.50 | 14.00 | 10/27 | 2.20 | 1.84 | 1.28 | 1.00 | ||
| Muncie - 71 & later (wide ratio) | 22.25 | 14.00 | 26/32 | 2.58 | 1.91 | 1.48 | 1.00 | ||
| Muncie - 70 & later M22 (wide ratio) | 22.25 | 14.00 | 26/32 | 2.58 | 1.91 | 1.48 | 1.00 | ||
| Muncie - 71 & later (close ratio) | 22.25 | 14.00 | 26/32 | 2.20 | 1.84 | 1.28 | 1.00 | ||
| Muncie - 70 & later M22 (close ratio) | 22.25 | 14.00 | 26/32 | 2.20 | 1.84 | 1.28 | 1.00 | ||
| T - 10 (wide ratio) | 21.50 | 14.00 | 10/18 | 2.54 | 1.89 | 1.51 | 1.00 | ||
| T - 10 (close ratio) | 21.50 | 14.00 | 10/18 | 2.20 | 1.84 | 1.31 | 1.00 | ||
| Super T- 10 (wide ratio) | 22.25 | 14.00 | 26/32 | 2.64 | 1.75 | 1.33 | 1.00 | ||
| Super T - 10 (close ratio) | 22.25 | 14.00 | 26/32 | 2.43 | 1.61 | 1.23 | 1.00 | ||
| Richmond 4 speed | 21.57 | 16.50 | 26/32 10 spline input available | 2.43 2.64 2.64 2.88 | 1.61 1.75 1.80 1.91 | 1.23 1.34 1.23 1.22 | 1.00 1.00 1.00 1.00 | ||
| Richmond 5 speed | 21.57 | 16.50 | 26/32 10 spline input available | 3.27 4.06 4.41 | 2.13 2.22 2.22 | 1.57 1.57 1.57 | 1.23 1.23 1.23 | 1.00 1.00 1.00 | |
| Richmond 6 speed | 21.87 | 18.00 | 26/32 10 spline available | 3.27 3.01 | 2.13 1.88 | 1.00 1.00 | 0.80 0.80 | 0.62 0.62 | |
| T56 (Camaro) | 26.37 | 21.08 | 26/27 Camaro | 3.36 2.97 | 2.07 2.07 | 1.35 1.43 | 1.00 1.00 | 0.80 0.80 | 0.62 0.62 |
| TREMIC TKO | Face of Bellhousing Mount = 21.9" Provided by Customer | ||||||||
